What gutter installation costs in Sacramento

Why Sacramento prices run above the national average

California labor, California workers' compensation rates, and aluminum coil that costs more delivered here than in Texas or Ohio. Expect 15–25% above the figures in a national gutter-cost article. The ranges below are what licensed contractors typically charge in Sacramento County and the Roseville–Folsom suburbs in 2026.

Gutter repair prices

A visit that covers two or three of these is usually $350–$700. Wind damage usually costs the same as any other repair; photograph it yourself first, before anything is moved. The gutter repair page describes each job.

• Reseal a leaking corner or end cap$175–$300
• Re-hang a sagging run (per 20 ft)$175–$350
• Replace a downspout, upsized to 3x4$140–$260
• Add a downspout to a long run$200–$350
• Replace a damaged 10–20 ft section$250–$550
• Re-hang a tile-roof gutter (per 40 ft)$300–$550
• Clear a plugged buried drain line$150–$400

Typical ranges, not a quote.

Gutter installation cost: Sacramento prices per foot

Tear-off and haul-away of the old system is usually included; ask. Fascia repair is a separate line. The cost is driven more by the roof than by the house size — a two-story tile home in Folsom with many corners is a different job from a single-story ranch in Tahoe Park with four straight runs. The replacement page explains the sizing; the tile roof page explains the add-on.

• 5-inch, 2x3 downspouts, 160 ft single-story$1,750–$2,250
• 5-inch, 3x4 downspouts, 160 ft single-story$1,900–$2,600
• 6-inch, 3x4 downspouts, 160 ft single-story$2,250–$3,050
• 5-inch, 2x3 downspouts, 220 ft two-story$2,400–$3,100
• 5-inch, 3x4 downspouts, 220 ft two-story$2,650–$3,500
• 6-inch, 3x4 downspouts, 220 ft two-story$3,100–$4,200

Typical ranges, not a quote.

Gutter guards

Aluminum screen typically $6–$11 per foot; stainless micro-mesh $12–$22 per foot; reverse-curve $22–$35 per foot. On a 160-foot home that's roughly $1,000–$3,500 by type. Cheapest when installed with new gutters. The guards page matches type to tree.

Gutter cleaning

Single-story typically $140–$230, two-story $210–$350, drain-line jetting extra if the buried line is plugged. See gutter cleaning.

What moves the price

• Stories. Two-story work typically costs 15–25% more for the setup.
• Tile. $2–$4 per foot for long-reach hangers, tile lifting and resetting, and working from the eave.
• Corners. Every inside and outside corner is a miter. A hip-roof tile home in Roseville can have twelve; a ranch house has four.
• Fascia. The biggest surprise on old houses. Ask the contractor to probe it before quoting, so it's on the estimate, not the invoice.
• Gutter size. Six-inch runs about 20% more than five and is worth it under trees and on big roofs.
• Drainage. If the old downspouts fed a buried line that's dead, extensions or a new line are a separate decision.
• Season. Availability changes more than prices do. October and November book up; a September estimate usually gets a date before the rain.

A worked example (illustrative)

A two-story tile-roof home in Folsom's Empire Ranch: 220 feet of gutter, six downspouts, ten corners, one soft corner of fascia. Six-inch .032 aluminum with 3x4 downspouts at $16 a foot is $3,520; tile hangers and reset at $3 a foot, $660; eight feet of fascia at $14, $112; extensions on six downspouts at $45, $270. About $4,560, one long day, old gutters hauled off. The same house quoted at $2,900 is 5-inch .027 aluminum on standard hangers screwed to the fascia at shingle height — which is what's on it now.

Reading a Sacramento gutter quote

Ask for the gauge (.032, not .027), the hanger type and spacing (hidden, every 24 inches), the downspout size, the tile detail if you have tile, and whether fascia and haul-away are included. A quote $800 under the others is often thinner metal, spike hangers and 2x3 downspouts, hung the way the old ones were. The cheapest quote is usually the same gutters you're replacing goes line by line.

An estimate should be free, written and itemized — ask how long the price holds — from a contractor who gives you a CSLB license number you can check at cslb.ca.gov. If someone wants a signature before they leave the driveway, that's a sales model, not a price.

Common pricing surprises

• Fascia found after the old gutter comes off. Avoid it with a probe from the ladder before the quote and a per-foot price written in.
• A dead drain line. If the downspouts fed a buried line that won't take water, extensions or a new line are extra. Test it with a hose before the estimate visit.
• Extra downspouts. A long run under trees may need a second outlet. It belongs on the first estimate, not added on the day.
• Tile that cracks. Agree on a per-tile price in writing before work starts.
• Color. Standard colors are usually included; an unusual match can cost more or take longer to arrive. Ask.

If the budget is tight, what to do first

Start at the bottom. Extensions that carry water away from the foundation are the cheapest line on any estimate and do the most for the house. Next, reseal the corners that drip and re-hang anything sagging before the storms. Then add a downspout where a long run overflows. Replacement can wait a season if the system is aluminum and mostly sound; it shouldn't wait if it's rusted steel or the fascia is going. Guards come last, and only under the trees that justify them.

What an estimate visit looks like

Expect the contractor to walk the house, measure each run, go up the ladder at the corners and the worst spots, and look at where every downspout ends. On tile roofs, they should check the gutter height against the tile lip. Ask questions while they're there: which runs are the problem, what can wait, and what can't. The written estimate should follow within a day or two, with line items you can compare against other quotes and against the ranges on this page.

Timing and price

Prices don't change much with the season, but availability does. Repairs fit in most weeks of the year. Replacement is easiest to schedule in late summer and September, before the fall rush. An estimate in hand by early October gives you the most choice of dates before the first storms.